SOUND SYSTEM MANAGEMENT AND CONTROL SOFTWARE

RDNet is the RCF management software suite for Sound System Engineers. A robust management network for RCF devices, a line-array design tool, a monitoring platform, and a complete audio analyzer in one package. 
RDNet provides intuitive management of every connected device/object on the network. Network users can control all DSP settings inside any compatible device, including advanced subwoofer configurations, from a single object to groups of objects.
RDNet users can edit and create recallable presets for RCF devices.

A New Definition of Bass. Simplified Tuning. Unrivaled Depth.

RCF has created a groundbreaking solution for offline/unpowered device configuration. With RDTap, users can inspect and configure devices without needing to power  the device. Sound engineers can design a system within the RDTap App on the move and configure each subwoofer by tapping the RDTap logo, with RCF [patent-pending] contactless technology. As an alternative, RDNet management software enables comprehensive real-time control and monitoring of compatible, network-connected devices.

The RDTap app offers contactless communication with the subwoofer. Users can access pre-loaded presets to quickly configure popular RCF system or optimize compatible speakers, subwoofers, and line arrays.

RDTap enables contactless communication, offering setup management and parameter updates, even when the unit is unpowered. By tapping the RDTap logo at the back panel with a smartphone running RDTap, the app transfers to the unit every aspect of the defined setup, including preset configurations, equalization, mid-low compensation for line arrays, and precise delay and time alignment settings. Or read the status of the speaker.

This is specially convenient when upgrading your subwoofers and giving your old main system a new life, with the assistance of presets, EQs, delays, and management via RDNet.

Unlike other control technologies that operate over long distances, this solution focuses on near-field interactions, where security, precision, and unpowered operations before rigging are key. Data transmission occurs at close range, ensuring that changes are applied only when intended, without interference from further distances or external devices. This makes it a highly efficient and user-friendly way to manage the subwoofer’s settings and performance before set up takes place.

ADVANCED CROSSOVER ENGINE

FACTORY-TUNED PRESETS FOR PERFECT SUB-TOP PAIRING

Pair your full-range speaker with RCF ACE-enabled SUBs and unlock your system's true potential. RCF’s proprietary Advanced Crossover Engine (ACE) is engineered to precisely match the time delay and align the phase on a broader range than the usual crossover frequency range between RCF subwoofers and FiRPHASE-enabled full-range speakers. 

Drive the Rhythm of the Beat

With up to 8000 Watts of power, our Class-D amplifier can manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low thermal loss.  The stereo input circuit features a low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. RCF amplifiers are designed according to EN62368-1 for maximum safety and present a Switch-Mode Power Supply section that combines high efficiency with minimum weight.

Advanced Precision Transducers

SUB 9000 Series subwoofers incorporate the latest transducer technology from our labs. Employing lightweight aluminum core coils, high-damping cellulose cone material, composite spiders and a 4-layer inside-outside voice coil, the ultra-long excursion moving mass gains high power with fast acceleration. Despite their small and lightweight footprints, SUB 9000 Series subwoofers produce powerful yet articulate bass, remaining true to even the most subtle low-frequency variations.

High-Class Neodymium

Neodymium, a rare-earth material, enhances efficiency, power handling, and weight reduction. Using a 20% stronger magnetic field than typical neodymium grades, this new design enables precise control and higher force.

Bass Motion Control

When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.

The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.

Designed for rigorous touring, SUB 9000 Series subwoofers feature tour-ready, weatherproof plywood construction with a durable polyurea finish. The included magnetic rain cover protects the connection panel from rain and dust, while rugged powerCON TRUE1 TOP AC connectors ensure reliable power delivery in any environmental condition. Subs are stackable and lightweight, have ergonomic handles with rubber grips, and are designed for easy set-up and tear-down. M20 pole mounts on the top and side of the cabinet offer flexible top speaker placement. Connections for a detachable front cart are included, enabling easy transport on wheels (cart sold separately).